Chimney Repair in Everett - You See the Footage Before You Get a Price

Chimney Repair in Everett, MA

Chimney repair in Everett, MA typically costs between $350 and $2,800 depending on scope, and most jobs our team completes in a single visit. We’re familiar with the triple-decker blocks along Broadway and the wood-frames tucked behind Glendale Park. When mortar starts dropping onto your roof or water shows up on the ceiling beneath the flue, you don’t want a dispatcher in another state guessing which end of the stack is failing. Call (844) 803-1545 - a live person answers, 24 hours a day.

Call (844) 803-1545

Why Everett Homes Are Different

Everett sits on a narrow strip between the Mystic River and Chelsea Creek, and that tidal moisture doesn’t stay outside. The air here carries more salt and humidity than you’ll find even three miles west in Medford, and it works into the mortar joints of exposed chimney stacks year-round. Boston’s freeze-thaw cycles exploit every hairline crack. We’ve repointed crowns in Everett that were sound five years earlier but cracked through after two hard winters on the water.

The housing compounds this. Everett is overwhelmingly stocked with pre-1930 triple-deckers and two-family wood-frames, most of which have original brick chimney stacks built for coal or oil that have since been converted to gas appliances. This city-wide pattern means chimney technicians in Everett routinely find flues that are either undersized for their current appliance, stripped of their clay-tile liner from decades of oil-burner acids, or never properly relined after fuel conversion - making camera inspection and relining far more central to chimney work here than in post-war suburbs.

Chimney Repair in Everett

Our crews handle chimney repair across Everett’s 02149 ZIP code, from the Broadway corridor to the riverfront. The most common calls we get involve mortar failure, spalled brick from creek moisture, and crown cracks that let water straight into the stack. Every repair starts with a Level-2 camera inspection so we can show you exactly what we’re talking about - photos you can see, a plain-English verdict. Learn more about our full Chimney Repair capabilities.

Mortar Repointing

Everett’s triple-decker chimneys were laid up with lime mortar that has now seen a century of freeze-thaw. We grind out the failed joints to proper depth and repoint with color-matched, professional-grade mortar that moves with the brick instead of fighting it. On shared stacks in the Glendale neighborhood, we coordinate with landlords to phase the work so no tenant loses heat. A typical repointing job on a standard Everett two-flue stack runs $1,200-$2,400.

Spalling Brick Repair

The moisture coming off Chelsea Creek doesn’t just stain brick - it saturates it, and when temperatures drop, the face pops off in sheets. We remove spalled units, source matching brick when possible, and rebuild the affected courses. Spalling repair on a localized section typically costs $650-$1,400 in Everett. For severe cases near the riverfront, we’ll recommend a new cap and crown to stop the water source before we repair the damage.

How quickly can you get to Everett for a chimney repair?

We typically schedule Everett repairs within 1-3 business days, and same-day service is often available for active leaks or structural safety concerns. Our technicians know Everett’s street layout and parking restrictions around the triple-decker blocks, so we don’t waste time navigating. Call (844) 803-1545 to check today’s availability - estimates are free.

Chimney Cleaning & Sweep in Everett

Chimney cleaning and sweep service in Everett, MA typically runs $149-$289 for a standard Level 1 cleaning with inspection, and most appointments are completed in a single visit. Our technicians carry the brushes, rods, and HEPA vacuums needed for Everett’s narrow triple-decker flues, so we don’t waste a trip. Learn more about our Chimney Cleaning & Sweep process.

Level 2 Camera Inspection

Level 2 is required when you’re buying or selling a home, after a chimney fire, or whenever the appliance or fuel type changes. We run a camera up the full length of the flue, documenting every joint, every liner segment, every offset where one flue weaves around another inside the stack. In Everett’s triple-deckers, these offsets are common and often the first place liner damage hides. You’ll receive photos, a written verdict, and a clear recommendation. Level 2 inspections in Everett typically cost $249-$329 depending on flue count and accessibility.

Creosote Removal

Everett’s older chimneys with poor draft - common in undersized flues - tend to produce Stage 2 and 3 creosote deposits faster than modern systems. We remove it with professional-grade brushes, chains, and vacuums, never chemicals that mask the problem. Heavy creosote removal in Everett runs $189-$289 above the base sweep price.

Does chimney cleaning in Everett cost more than in nearby Malden or Medford?

Our base rates are consistent across the immediate area, but Everett jobs can run slightly higher when we’re dealing with multi-flue triple-decker stacks or heavy creosote from decades of oil-burner use. The complexity of the job matters more than the city line. We quote upfront before any work begins - the number on the estimate is the number on the invoice.

Fireplace Services in Everett

Fireplace service in Everett, MA typically runs $180-$650 depending on the repair, and most appointments are completed same-day by our technicians. If you live in a triple-decker off Broadway or a two-family near the Mystic River, you already know your chimney has seen a century of winters. Learn more about our Fireplace Services.

Gas Fireplace Service

Most Everett fireplaces were converted from wood or oil to gas decades ago, often without a proper liner upgrade. We inspect the gas valve, pilot assembly, thermocouple, and burner ports, then run a camera to confirm the flue can handle the exhaust. A gas fireplace service in Everett typically costs $180-$280. If we find the flue is undersized or the clay tile is eroded from old oil-burner acids - common in triple-deckers near Broadway - we’ll show you the photos and explain exactly what needs to happen next.

Fireplace Insert Installation

Installing a fireplace insert in an Everett triple-decker is rarely straightforward. The original firebox was built for coal, the flue is often offset around neighboring flues inside a shared stack, and the clearance to combustibles may not meet modern code. We measure everything and use professional-grade liners from Olympia Chimney or DuraFlex to ensure safe venting. Fireplace insert work in Everett generally ranges $1,800-$3,200 installed, including liner and connection.

Is emergency fireplace service available in Everett?

Yes, our phones are staffed by a live person 24 hours a day, 7 days a week, including holidays. If you smell gas, see smoke backing up into the room, or suspect carbon monoxide from a shared flue, call (844) 803-1545 immediately and we’ll dispatch a background-checked, uniformed technician to diagnose and secure the situation on arrival.

Chimney Cap & Crown in Everett

Chimney cap and crown repair in Everett typically runs $280-$650 for most jobs, and our crew completes most same-day. If you’re seeing water stains on the ceiling near your fireplace or finding brick flakes in your yard after winter, the crown is cracked and the cap is either missing or failing. Learn more about Chimney Cap & Crown options.

Cap Installation

New cap installation on an Everett triple-decker often means fitting a multi-flue cap over a shared stack serving multiple units. We measure on site, fabricate to fit, and install caps from Gelco and Famco rated for coastal New England weather. Most installations run $280-$450 in Everett, depending on stack size and access.

Crown Repair

The concrete crown at the top of your chimney is the only thing keeping water from saturating the brick below. In Everett, crowns crack faster than almost anywhere we serve because tidal moisture wicks into the concrete, then freezes and expands. Crown repair in Everett runs $340-$550 for rebuilds, $180-$280 for coating applications on crowns that are sound but weathered.

Is active water intrusion through my chimney an emergency?

Yes. Active water intrusion damages framing, insulation, and plaster with every hour it continues. In Everett’s older housing stock, ceiling and wall assemblies are often lath-and-plaster or early drywall that degrades quickly once saturated. We answer calls live 24 hours a day and can dispatch for same-day temporary sealing if weather permits, followed by permanent repair.

Chimney Liner & Rebuild in Everett

Chimney liner replacement and chimney rebuilds in Everett, MA typically run $1,800-$6,500 depending on whether you’re relining a single flue or rebuilding a shared triple-decker stack, and most of our Everett customers get same-day or next-day scheduling when they call. Learn more about Chimney Liner & Rebuild options.

Stainless Steel Liner Installation

Stainless steel liners are the workhorse solution for Everett’s converted gas and oil systems, especially in the triple-deckers near Broadway where flues were originally sized for coal. We install rigid and flexible DuraFlex stainless liners rated for the appliance they’re serving. A typical stainless steel liner installation in Everett runs $2,200-$3,800 for a single flue, including the Level-2 inspection, photos, and permit-ready documentation.

Liner Replacement

Replacement becomes necessary when clay tile has spalled, cracked, or been eaten away by decades of acidic oil exhaust - a pattern we see almost weekly in the 1890-1920 wood-frames near Glendale Park. Liner replacement in Everett runs $1,800-$3,500 depending on flue height, accessibility, and whether existing liner fragments need mechanical extraction. We don’t just drop a new tube in. We inspect the surrounding masonry and verify the new liner’s diameter matches the appliance’s BTU output.

Does liner and rebuild pricing in Everett differ from nearby cities?

Everett pricing runs roughly comparable to Malden and Medford for standard liner work, but Everett’s triple-decker density and shared-stack complexity can add 10-20% to labor on multi-flue jobs versus single-family homes in less dense areas. We complete most Everett jobs in a single visit because we stock parts sized for your housing stock.

Brands We Service in Everett

We work exclusively with professional-grade materials from DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield - no builder-grade substitutes. Our trucks carry common liner diameters, crown coating, and cap sizes for Everett’s triple-decker stock, so most jobs finish without a return trip. See our brands.

Pricing for Chimney Cleaning in Everett, MA

Neighborhoods We Serve in Everett

Our technicians are routinely in these areas, and most appointments across Everett are scheduled within 24-48 hours of your call:

• Broadway District - dense corridor of triple-deckers and mixed-use buildings with multi-flue stacks
• Glendale Park area - tightly packed wood-frames with shared chimneys and limited driveway access
• Elm Street corridor - two-families and small apartment buildings with original brickwork showing accelerated spalling
• Route 16 vicinity - post-war infill mixed with older stock, often with undocumented fuel conversion histories
• Mystic River waterfront - exposed stacks taking the brunt of tidal moisture and wind-driven rain

Service Area - Cities Near Everett

We dispatch and schedule from our Boston office, with crews serving Everett, MA locally along with Malden, MA, Chelsea, MA, Revere, MA, Medford, MA, and Somerville, MA. The same live-answer phone, same background-checked technicians, same upfront pricing applies across the entire service area.

FAQs About Chimney Cleaning in Everett