Fast, Reliable Chimney Cap & Crown Across Spokane
A cracked crown or missing cap in Spokane isn’t a tomorrow problem once the temperature drops below freezing. Water seeps in, freezes overnight, and by morning you’ve got spalled brick and a repair bill that tripled. We see it every October when the first hard freeze hits the South Hill and homeowners call us in a rush. Our Chimney Cap & Crown crew covers all of Spokane, from Browne’s Addition up through North Spokane and across the Valley, and most days we’re on-site within a few hours of your call. We’ve been driving these streets since 1984, and we know which 1920s bungalows have the original coal flues and which 1960s ranches are still running factory caps that rusted through a decade ago. Call (844) 803-1545 and you’ll reach a live person, not a queue. We’ll give you upfront pricing and a repair window we intend to keep.
Why Hearthstone Chimney Co. Is Spokane’s Preferred Chimney Cap & Crown Company
Forty-two years in this trade means we’ve worked on chimney caps and crowns in every Spokane neighborhood that has a fireplace. We’ve replaced wind-torn caps on Hays Park homes after January ice storms, rebuilt crowns on Browne’s Addition foursquares where the original mortar finally gave out, and installed multi-flue caps on South Hill duplexes where the landlord needed one solution for two tenants. Our technicians are background-checked, uniformed, and carry the parts to finish most jobs in a single visit. That matters in Spokane, where a second trip means another morning below 20°F with an open flue.
Every inspection ends with photos you can see and a plain-English verdict. No jargon, no scare tactics. If your crown needs a coating rather than a rebuild, we’ll say so. The 90-Day Done Right Promise covers every job in writing, no arguing. And when you call (844) 803-1545, a live person answers, 24 hours a day. We’ve handled midnight emergency calls from Spokane Valley homeowners who spotted water pouring down their flue during a February thaw, and we’ve had crews there before sunrise.
Our Chimney Cap & Crown Services in Spokane
Cap Installation
New cap installation in Spokane runs higher than the national average because our wind loads and freeze-thaw cycles demand heavier-gauge materials. We install stainless steel and copper caps from Olympia Chimney and Famco, sized to your flue count and roof pitch. On North Spokane ranches with single prefab flues, a standard cap with mesh screening typically suffices. South Hill homes with dual-flue masonry stacks need custom measurements, and we fabricate on-site when the spacing is irregular. A proper cap keeps Spokane’s heavy spring rains and autumn leaf drop out of your flue, and the mesh barrier stops birds and squirrels that nest in chimneys all across the 99203 and 99208 zip codes.
Cap Replacement
Most cap replacements we do in Spokane are on homes where the original cap was either too thin or improperly secured. The 40°F shoulder-season temperature swings loosen fasteners over time, and once a cap lifts in a November windstorm, it’s gone for good. We remove the remnants, inspect the flue tile for hidden cracking, and install a replacement with proper storm collars and anchoring. If your flue is oversized from a coal-to-gas conversion, common in Browne’s Addition and the lower South Hill, we’ll size the cap correctly rather than force a standard fit. Done right, and we stand behind it.
Crown Repair
The crown is the concrete slab that seals the top of your masonry chimney, and in Spokane it takes a beating. Our freeze-thaw cycles are among the most severe in the state, with October-to-April temperature swings that open hairline cracks into quarter-inch gaps. We repair crowns by cutting back deteriorated edges, applying a bonding agent, and pouring new high-strength concrete with a proper drip edge and slope. For crowns with moderate cracking but sound structure, we apply a flexible crown coating from Copperfield that bridges small gaps and sheds water. Every crown repair includes a Level-2 camera inspection of the flue beneath, because a leaking crown often hides interior damage you cannot see from the roof.
Crown Coating
Crown coating is the preventive option Spokane homeowners ask about once they understand how crowns fail. We apply a professional-grade elastomeric coating, rated for the temperature extremes of inland Washington, that remains flexible at 0°F and won’t degrade under summer UV. It’s not a substitute for rebuilding a crumbling crown, but for sound concrete with minor cracking, it adds years of protection at roughly half the cost of full repair. We recommend it for homeowners in the Valley and Country Hills area who’ve already invested in a quality cap and want to protect the crown beneath it.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Spokane
We stock caps, crowns, and repair materials from Olympia Chimney, Famco, and Copperfield, brands that hold up to Spokane’s climate rather than deteriorating in three seasons. Olympia’s stainless multi-flue caps handle our wind loads without rattling loose. Famco’s galvanized and copper lines give homeowners options that match roof hardware and budget. Copperfield’s crown coatings and repair mortars are formulated for freeze-thaw zones like ours. Because we keep inventory on our trucks and in our Spokane-area warehouse, we don’t order parts and make you wait. Most cap and crown jobs start and finish the same day you call.
Common Chimney Cap & Crown Problems We See in Spokane Homes
- Crown cracks from freeze-thaw cycling. Spokane’s shoulder seasons swing from 50°F afternoons to teens overnight, and that expansion and contraction opens cracks in crown concrete within a few years. Water enters, freezes, and lifts the crown away from the brick course beneath it.
- Missing or wind-damaged caps after winter storms. The basin topography that funnels cold air into Spokane also generates sudden wind gusts down from the north. Lightweight caps with inadequate fastening lift off and land in neighboring yards, leaving the flue open to rain and animals.
- Acidic flue-gas condensation on dual-flue chimneys. In South Hill and Browne’s Addition homes with oversized coal flues converted to gas, the excess airspace causes condensation that drips back onto the smoke shelf and crown interior. Homeowners smell it first, then see the white efflorescence staining the exterior brick.
- Rust-jacked prefab caps on 1960s-70s ranches. North Spokane and Spokane Valley homes with original metal chimneys often have factory caps that rusted through at the seams. The rust stains the chase cover below, and once water reaches the chase interior, the metal liner begins deteriorating from the outside in.
Pricing for Chimney Cap & Crown in Spokane, WA
We’re plain about costs because nobody likes a surprise on the invoice. A typical single-flue stainless cap installation in Spokane runs $280-$450, including removal of the old cap, flue tile inspection, and proper anchoring. Multi-flue custom caps on South Hill masonry stacks range $550-$950 depending on dimensions and material. Crown coating for sound concrete with minor cracking costs $400-$650. Full crown rebuilds, including demolition of the failed slab and pouring new concrete with proper slope and drip edges, run $850-$1,400. Crown repair with partial reconstruction falls between those points at $650-$950.
What moves the number? Accessibility matters, a steep South Hill roof costs more than a single-story Valley ranch. Flue condition matters, if we find cracked tile beneath a missing cap, we’ll show you photos and quote the repair before proceeding. Material choice matters, copper caps last longer than galvanized but cost roughly 40% more upfront. Every estimate is free, every price is upfront, and the number on the estimate is the number on the invoice. Call (844) 803-1545 for an exact quote on your chimney.
We Also Serve Cities Near Spokane
Our service area extends beyond city limits to cover homeowners in Spokane Valley, Dishman, Country Homes, and Opportunity with the same response times and the same 90-Day Done Right Promise. Whether you’re in a 1950s ranch near Spokane Community College or a newer build off Sullivan Road, we handle cap and crown work with the same thoroughness we bring to every job. We also handle Chimney Liner & Rebuild in Spokane for homes where the cap and crown damage has exposed deeper structural issues, and Chimney Cleaning & Sweep in Spokane to keep your flue clear through burn season.
Serving Spokane, WA - Our Local Coverage Area
We’re based in the Spokane area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Chimney Cap & Crown in Spokane
Most cap and crown calls in Spokane are scheduled same-day or next-day, and emergency water-intrusion calls get priority dispatch. Our technicians cover all Spokane zip codes including 99214, 99215, 99216, and 99217 from a centralized staging area, so drive time to the South Hill, North Spokane, or the Valley is typically under 30 minutes. Call (844) 803-1545 and a live person will give you the next available window, no voicemail queue.
Yes, those are core service areas for us. We’ve replaced caps and rebuilt crowns on dozens of 1910s-1940s homes in Browne’s Addition and the lower South Hill, and we’re familiar with the dual-flue configurations and coal-to-gas conversions common in that housing stock. The oversized flues require custom cap sizing and often reveal condensation issues a less experienced sweep might miss.
Yes. We answer calls 24 hours a day, 7 days a week, and for active water intrusion we dispatch a technician to tarp or temporarily seal the crown and cap until weather permits permanent repair. The temporary seal is no extra charge, it’s part of getting your home dry. We’ll schedule the full repair at your convenience and give you upfront pricing before any work begins.
Cap and crown work in Spokane typically runs 10-15% below Seattle rates and roughly comparable to Portland, though our freeze-thaw severity means we see more crown rebuilds and fewer simple coating jobs. Labor rates are lower here, but material costs are national. The net effect is fair pricing for work that must withstand harsher winters than the coastal cities face.
Every cap and crown job is backed by our 90-Day Done Right Promise in writing. If the repair fails, the coating cracks, or the cap loosens within 90 days, we return and make it right with no paperwork and no arguing. Beyond that, manufacturer warranties apply, Olympia Chimney and Famco both offer multi-year coverage on materials. We document every job with photos so there’s never a question about what was done or when.
Written by Russell Haines, Owner at Hearthstone Chimney Co., serving Spokane since 1984.