Fast, Reliable Chimney Cap & Crown Across Richland Hills
Chimney cap and crown repair in Richland Hills typically runs $280-$650 for most jobs, and our Chimney Cap & Crown in Richland Hills crew can usually get there same day you call. We’re familiar with every street in this one-square-mile city, from the postwar ranches along Baker Boulevard to the brick homes tucked behind Northeast Loop 820. Most Richland Hills chimneys went up in the 1950s and 1960s with original crowns poured from plain mortar, no overhang, no drip edge. Sixty years of North Texas sun and Blackland Prairie clay shifting beneath the foundation has left a lot of those crowns cracked and spalling. When water gets through, it finds the clay-tile flue liner next, then the damper, then the firebox. We stop that progression where it starts. Call (844) 803-1545 and a live person will pick up, 24 hours a day.
Why Hearthstone Chimney Co. Is Richland Hills’s Preferred Chimney Cap & Crown Company
We’ve been driving to Richland Hills since 1984, long before the Diamond Hill Station area filled in and when Denton Highway was still two lanes in spots. Homeowners here know us because we show up when we say, wear a uniform, and explain what we found in plain English before we quote a price.
Our technicians carry the same professional-grade materials on every truck - Gelco caps, HeatShield crown coating, Olympia Chimney components - so most Richland Hills jobs finish in a single visit. No waiting on parts, no return trips, no surprises on the bill.
The 90-Day Done Right Promise covers every cap and crown job in writing. If it’s not right, we make it right. No paperwork to dig up, no arguing about fine print. Russell Haines put that standard in place when he founded this company, and it hasn’t changed in over 42 years.
A live person answers our phones every hour of every day. Not a callback queue, not an app. When a February cold snap hits North Texas and you suddenly need your fireplace, you reach us.
Our Chimney Cap & Crown Services in Richland Hills
Cap Installation
New cap installation in Richland Hills usually means fitting a proper protective cover onto a chimney that never had one, or replacing a cheap hardware-store model that blew off in a spring storm. We measure the flue or flues on site and fabricate a cap with correct screen height to draw properly while keeping raccoons, squirrels, and nesting birds out of 60-year-old clay liners. A single-flue stainless cap installed on a typical Richland Hills ranch runs $280-$420. Multi-flue caps covering the full crown start around $480.
Cap Replacement
Cap replacement is our most common call in the neighborhoods off Glenview Drive and around Haltom Road. The original cap rusted through, or a previous owner installed galvanized steel that lasted maybe eight years in Texas heat. We remove the old unit, inspect the flue mouth for hidden deterioration, and install a replacement from Gelco or Famco in stainless steel or black powder-coat to match your roofline. Most replacements in Richland Hills fall between $320 and $550 depending on flue count and whether the flue tile itself needs repair.
Crown Repair
Crown repair addresses the concrete or mortar wash that tops your masonry chimney. In Richland Hills, we see crowns that were never properly poured to begin with - too thin, no reinforcement, no slope to shed water. Blackland Prairie clay soil shifts beneath the stack, the crown cracks, and water funnels straight into the core. We grind out deteriorated material, rebuild with proper crown mix, add a drip edge, and seal with a waterproofing agent. Typical crown repair in Richland Hills runs $450-$650. If the crown has completely disintegrated and the brick beneath is compromised, our Chimney Liner & Rebuild in Richland Hills service may be the more durable path.
Crown Coating
Crown coating with HeatShield is a practical option when the crown has hairline cracks and minor spalling but sound structural integrity underneath. We clean the surface, apply the proprietary refractory coating, and create a flexible, waterproof membrane that bridges small cracks as the chimney settles through seasonal clay movement. It’s not a substitute for a failed crown, but for the right Richland Hills chimney, it adds 10-15 years of protection at roughly half the cost of rebuild. Expect $380-$520 for coating on a standard residential crown.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Richland Hills
We stock Gelco and Famco caps, HeatShield crown coating systems, and Olympia Chimney components on every service truck. That inventory matters in a fully built-out city like Richland Hills where there’s no time to order parts and return next week. When we pull up to a home off Boulevard 26 or near the Smithfield area, we’re carrying what we need to finish. These are the same brands specified by chimney professionals nationwide, not builder-grade substitutes that rust out or fit poorly. The cap or crown we install today should outlast the next two homeowners, and we choose materials accordingly.
Common Chimney Cap & Crown Problems We See in Richland Hills Homes
- Crown cracks from clay soil movement. Tarrant County’s Blackland Prairie clay expands and contracts dramatically with moisture. We regularly find crowns split clean through on Baker Boulevard-area homes where the chimney settled slightly away from the house ridge, opening a gap that funnels rainwater onto the firebox.
- Missing or rusted original caps. Many 1950s Richland Hills chimneys never had a cap installed, or the homeowner added a cheap galvanized model decades ago. Without protection, debris and water enter the flue, accelerating deterioration of original clay liners that are already 60-plus years old.
- Spalling mortar from thermal shock. Those rare but severe North Texas freezes, like February 2021, catch homeowners who haven’t used their fireplace in years. Water trapped in porous crown mortar freezes, expands, and pops off surface chunks. The damage often isn’t visible from the ground.
- Stage-2 creosote under a “barely used” fireplace. Because Richland Hills winters are mild, homeowners burn infrequently and at low temperatures - the worst combination for creosote buildup. A cracked crown lets moisture mix with that residue, creating acidic compounds that eat mortar from the inside. Our Chimney Cleaning & Sweep in Richland Hills service often reveals this hidden damage during routine maintenance.
Pricing for Chimney Cap & Crown in Richland Hills, TX
Here’s what cap and crown work actually costs in the Richland Hills market, based on the mid-century masonry chimneys we service:
| Service | Typical Range in Richland Hills |
|---|---|
| Single-flue cap installation | $280 - $420 |
| Multi-flue cap installation | $480 - $720 |
| Cap replacement (existing fit) | $320 - $550 |
| Crown coating (HeatShield) | $380 - $520 |
| Crown repair / partial rebuild | $450 - $650 |
| Full crown replacement | $780 - $1,200 |
Factors that move the number: flue count and size, accessibility of the chimney top, extent of hidden water damage beneath the crown, and whether the flue tile requires repair before capping. We provide upfront pricing after inspection, not after we’ve started work. The estimate is free, and the number we quote is the number on the invoice. Call (844) 803-1545 for an exact quote on your chimney.
We Also Serve Cities Near Richland Hills
Our service area extends naturally from Richland Hills into Richland Hills and the surrounding communities. We regularly cap and crown chimneys in North Richland Hills, Watauga, Hurst, and Haltom City - the same postwar housing stock, the same clay soil challenges, the same need for craftsmen who understand mid-century masonry. If you’re unsure whether we cover your address, call and ask. A live person will know.
Serving Richland Hills, TX - Our Local Coverage Area
We’re based in the Richland Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Chimney Cap & Crown in Richland Hills
We typically arrive same day or next day for cap and crown calls in Richland Hills, and emergency water-intrusion situations get priority scheduling. Our trucks run from a central Tarrant County position, so the one-square-mile footprint of Richland Hills works in your favor. Call (844) 803-1545 to check today’s availability.
Yes, we service every Richland Hills address in ZIP 76180, from the older ranches near Baker Boulevard to the homes tucked along Glenview Drive and the Boulevard 26 corridor. No neighborhood is outside our range.
Not meaningfully. Pricing reflects chimney condition and access, not ZIP code. Because Richland Hills homes share the same compact ranch footprint and chimney design as neighboring Haltom City and Watauga, our rates stay consistent across the area. The one difference: Richland Hills’s uniform 1950s-1960s stock means we diagnose faster and carry the right parts, which can actually save labor time.
Yes. Water intrusion through a failed crown or missing cap is treated as a priority call. A live person answers our phones 24 hours a day, and we’ll dispatch a technician to assess the damage and implement temporary protection if permanent repair requires scheduling. Call (844) 803-1545 any time.
Every cap and crown job is backed by our 90-Day Done Right Promise in writing. If the repair fails or the installation has an issue within 90 days, we return and make it right at no charge. No arguing, no paperwork to produce. Beyond that period, manufacturer warranties apply to Gelco, Famco, and HeatShield materials as specified. We’re a company that plans to be here in thirty years, so we don’t write guarantees we intend to dodge.
Ready to protect your chimney? Call (844) 803-1545 for a free estimate on cap or crown work in Richland Hills. A live person will answer, and we’ll get you scheduled at a time that works.
Written by Russell Haines, Owner at Hearthstone Chimney Co., serving Richland Hills since 1984.