Fast, Reliable Chimney Cap & Crown Across Arlington Heights
Chimney cap and crown repair in Arlington Heights typically runs $280-$650 for standard jobs, with most completed same-day by our Chimney Cap & Crown team. We’re familiar with the brick colonials along Arlington Heights Road and the ranch neighborhoods tucked between Rand Road and Golf Road - homes built during the village’s post-war boom that now need honest masonry work, not a sales pitch.
We’ve been driving to Arlington Heights since 1984, long enough to know which chimneys on the 60004 side of town were slapped together fast in 1962 and which 60005 split-levels have crowns that were never properly sealed. When you call (844) 803-1545, a live person answers. We’ll give you upfront pricing and a real arrival window. Most jobs finish in one visit.
Why Hearthstone Chimney Co. Is Arlington Heights’s Preferred Chimney Cap & Crown Company
Our reputation in Arlington Heights was built one chimney at a time. Homeowners here talk to each other at the Arlington Heights Memorial Library book sales, at the Metra station, over fences in the Scarsdale and Greenbrier neighborhoods. They remember which contractor showed up late and which one left the driveway clean. We’ve earned referrals across 60004 and 60005 because we document every inspection with photos the homeowner can see, then explain the verdict in plain English.
Response time to Arlington Heights averages under 90 minutes during business hours. Our trucks carry Gelco and Olympia Chimney caps in standard sizes, plus the materials to pour or coat a crown on the spot. We don’t order parts and disappear for two weeks.
There’s local knowledge that matters on these jobs. The 1950s-1970s housing stock dominating Arlington Heights was built with multi-flue masonry chimneys designed for oil heat. When those systems converted to gas, the oversized flues started venting cooler exhaust that condenses and drips back down, saturating the crown from the inside out. A technician who doesn’t understand that history might slap on a cap and miss the real problem. We don’t miss it.
Our Chimney Cap & Crown Services in Arlington Heights
Cap Installation
New cap installation in Arlington Heights runs $180-$340 for a standard single-flue stainless steel unit, or $320-$580 for a multi-flue cover on the double-flue chimneys common in the Greenbrier and Scarsdale areas. We measure on-site, fabricate if needed, and install same-day. Every cap we put on is sized to the flue, not close enough. A cap that fits wrong lets in water, and water is what destroys crowns in northern Cook County’s freeze-thaw cycles.
Cap Replacement
Replacement caps in Arlington Heights cost $150-$290 for straightforward swaps where the flue tile is intact. When we pull the old cap and find spalling tile or a cracked flue lip - common on chimneys venting gas appliances through oversized oil-era flues - we’ll show you the photo and explain before adding any work. Our Chimney Liner & Rebuild in Arlington Heights crew handles those cases. No surprises on the bill.
Crown Repair
Crown repair in Arlington Heights typically costs $380-$650. The village’s 30-plus annual freeze-thaw cycles turn hairline cracks into structural failures fast. We see this most on pre-1970 brick colonials near the downtown core and along Dunton Avenue, where the original crowns were poured with too much water in the mix and no overhang. We cut back to sound concrete, form a proper wash with new high-strength mortar, and seal the edge so water sheds clear of the brick.
Crown Coating
Crown coating is $280-$450 in Arlington Heights, a practical option when the crown is cracked but structurally sound. We use professional-grade flexible sealers that move with the masonry through freeze-thaw cycles. This isn’t a forever fix, but on a chimney that’s otherwise in decent shape, it can add five to seven years of protection. We’ll tell you honestly if your crown is past coating and needs rebuild. That’s the square deal.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Arlington Heights
We stock caps and crown materials from Gelco, Olympia Chimney, and Famco - brands that hold up to Arlington Heights weather, not the thin-gauge hardware-store versions that rust through in three seasons. Our trucks carry standard Gelco stainless and copper-finish caps in the sizes that fit most local flues, so we’re not ordering and waiting. When a custom cap is needed for an unusual flue configuration, we fabricate from Olympia Chimney components and install within a few days, not weeks.
Common Chimney Cap & Crown Problems We See in Arlington Heights Homes
- Crown wash failure from freeze-thaw damage. Northern Cook County’s 30-plus annual freeze-thaw cycles relentlessly attack mortar joints and crowns. Water infiltrates hairline cracks, freezes, expands, and accelerates spalling. By March, we’re rebuilding crowns on Arlington Heights chimneys that looked fine in October.
- Multi-flue chimneys with no cap or wrong-size caps. The 1950s-1970s ranch and split-level stock across 60004 and 60005 often has two flues sharing one stack - fireplace plus furnace or water heater. A cap sized for one flue leaves the other open to rain and animals.
- Gas exhaust condensation rotting crowns from inside. When Arlington Heights homes converted from oil to gas heat, the oversized clay-tile flues were rarely relined. Low-temperature gas exhaust condenses acidic moisture that drips back onto the crown, eroding it from below while weather attacks from above.
- Pre-1950 downtown chimneys with shared flue violations. On older streets near the village core, we regularly find single chimney stacks routing both a wood-burning fireplace and a gas water heater flue with no separation liner. Arlington Heights inspectors flag this during home sales, and the fix starts with a proper cap and often a liner.
Pricing for Chimney Cap & Crown in Arlington Heights, IL
| Service | Typical Range in Arlington Heights |
|---|---|
| Standard cap installation (single flue) | $180 - $340 |
| Multi-flue cap installation | $320 - $580 |
| Cap replacement (straightforward) | $150 - $290 |
| Crown coating | $280 - $450 |
| Crown repair / partial rebuild | $380 - $650 |
| Full crown replacement | $650 - $1,100 |
These are real numbers for Arlington Heights’s market, not teaser rates. What moves the needle: accessibility (steep roof, tight lot), crown size and condition, whether flue tiles need repair before capping, and if the chimney needs cleaning first. We also handle Chimney Cleaning & Sweep in Arlington Heights and often bundle services for efficiency.
Every estimate is free, in writing, and the number on the estimate is the number on the invoice. Call (844) 803-1545 to schedule.
We Also Serve Cities Near Arlington Heights
Our crews work throughout northern Cook County and beyond. If you’re in Bangor, Nazareth, Phillipsburg, or Easton, the same live-answer phone line and same-day scheduling applies. Chimney Cap & Crown in Arlington Heights remains our base, but we’ve built crowns and installed caps in every direction from here.
Serving Arlington Heights, IL - Our Local Coverage Area
We’re based in the Arlington Heights area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Chimney Cap & Crown in Arlington Heights
We typically arrive within 90 minutes during business hours and offer same-day emergency service for active leaks or animal entry. Call (844) 803-1545 - a live person answers 24 hours a day, 7 days a week - and we’ll give you a real arrival window, not a four-hour guess.
Yes. We work across 60004, 60005, and 60006, from the older homes near the downtown core to the post-war ranches in Greenbrier and Scarsdale to the split-levels along Rand Road. Every Arlington Heights chimney cap and crown job gets the same documentation, photos, and written estimate.
Yes. Active water intrusion, animal entry through a missing cap, or crown damage threatening structural integrity qualifies for emergency scheduling. Our trucks carry standard caps and crown repair materials, so most emergency calls in Arlington Heights resolve in a single visit.
Arlington Heights pricing sits in line with northern Cook County generally, perhaps slightly higher than exurban areas due to tighter lot access and the prevalence of multi-flue chimneys needing larger caps. The $180-$340 single-flue cap range and $280-$650 crown work spans what we quote in Palatine, Buffalo Grove, and Mount Prospect. Free estimates mean you’ll know before any work starts.
Every job is backed by our 90-Day Done Right Promise in writing - if it’s not right, we make it right with no paperwork and no arguing. Materials carry manufacturer warranties: Gelco and Olympia Chimney stainless caps typically carry lifetime limited warranties against defects. The Promise covers our labor and installation. Call (844) 803-1545 with any concern; we’ll be there when we say.
Written by Russell Haines, Owner at Hearthstone Chimney Co., serving Arlington Heights since 1984.