Chimney Repair in Englewood, CO
Chimney repair in Englewood typically costs between $250 and $1,800 depending on scope, and our crews complete most jobs in a single visit with upfront pricing confirmed before we start. We dispatch from our Denver office and carry the parts and materials needed to handle mortar repointing, flashing repair, spalling brick, and chimney waterproofing without ordering delays. If you’re in Englewood and your chimney is leaking, drafting poorly, or showing cracked mortar, call us at (844) 803-1545.
Why Englewood Homes Are Different
Englewood sits at 5,300 feet on Colorado’s Front Range, where winter temperature swings of 40 degrees in a single day force moisture through masonry joints repeatedly. The pre-1980 brick homes between Broadway and Santa Fe Drive, the mid-century ranches near Belleview Park, and the concrete-block construction in Hampden Hills all face freeze-thaw mortar decay that sea-level chimneys never encounter. The channeling effect of the South Platte valley accelerates wind at roof level, fatiguing chimney caps and flashing that would last decades in calmer locations.
Chimney Repair in Englewood
Englewood’s freeze-thaw cycles and intense UV exposure at elevation create repair patterns we don’t see in our coastal service areas. The mortar in unprotected chimneys is powdering out by March, and wind-lifted caps admit water that turns minor rust into complete component failure. Our Chimney Repair crews carry color-matched mortar rated for Colorado’s climate swing, vapor-permeable waterproofing sealers, and stainless caps engineered for Front Range wind loads.
Mortar Repointing
Water seeps into hairline cracks, expands overnight when temperatures drop below 20 degrees, and by spring the mortar is crumbling. On homes near Belleview Park and along the older streets off Logan Street, we’ve repointed chimneys that hadn’t been touched since the 1970s. Partial chimney repointing runs $450-$950; a full chimney runs $1,200-$1,800. Done right, repointing adds 20 to 30 years of service life. Done poorly, it traps moisture and accelerates decay.
Spalling Brick & Flashing Repair
Spalling, the flaking of brick faces, is common in Englewood’s softer, more porous mid-century brick. In Hampden Hills and near the original downtown grid, we’ve restored chimneys where spalling had progressed to expose the inner wythe. Localized spalling repair costs $350-$750; extensive work across multiple courses runs $900-$1,600. Flashing separation on low-slope roofs, common on Englewood ranches, costs $350-$650 for repair or $700-$1,200 for full replacement.
How quickly can you get to my Englewood home for chimney repair?
We typically schedule Englewood appointments within 24 to 48 hours, and emergency calls for active leaks or structural concerns receive same-day priority when routing allows. Because we dispatch from our Denver office, we’re never far from Englewood properties. Call (844) 803-1545 to check today’s availability.
Chimney Cleaning & Sweep in Englewood
Chimney cleaning and sweep in Englewood typically runs $180-$320 for a standard annual service, with Level 2 camera inspections ranging $280-$450. Most Englewood appointments are scheduled within 24-48 hours, and our crews complete the majority of jobs in a single visit. The dry Front Range climate and temperature swings at 5,300 feet create creosote and corrosion patterns distinct from our coastal markets.
Level 2 Camera Inspection
We use a specialized camera to examine the entire flue interior, from firebox to crown, documenting every crack, gap, or corrosion point with photos you receive. This is the standard we recommend for any Englewood home that has sat through summer without use, and it’s non-negotiable if you’re buying or selling. The camera reveals what no flashlight can: moisture damage to flue tiles, separation in factory-built joints, and creosote buildup that has reached hazardous thickness. Level 2 inspections run $280-$450.
Creosote Removal & Firebox Cleaning
A flue narrowed by creosote becomes dangerous when paired with a damper that can’t open to vent properly. We measure residue thickness, identify the stage of buildup, and remove it completely. For the occasional burner in Englewood’s milder winters, moderate creosote removal costs $220-$340. A full firebox cleaning runs $160-$240. Our Chimney Cleaning & Sweep service includes checking for wind-damaged caps and rust-seized dampers that we see weekly once temperatures drop.
Why does my damper stick after being closed all summer?
It’s rust from moisture and creosote residue binding the plate to its frame during months of disuse. Englewood’s dry climate actually accelerates this by allowing corrosion products to crystallize and harden. Forcing the handle risks snapping the plate. Call (844) 803-1545 and we’ll free or replace the damper, apply proper lubricant, and check for related moisture damage - estimates are free.
Fireplace Services in Englewood
Fireplace repair and service in Englewood typically runs $180-$650 depending on the work, and most calls are completed same-day or next-day during the October-November season rush. The freeze-thaw stress on firebox panels and the hard water mineral content affecting gas valves create maintenance needs specific to Front Range homes. We service both masonry and prefabricated units common in Englewood’s housing stock.
Wood Burning Fireplace Service
The freeze-thaw cycles of a typical Englewood winter stress firebox refractory panels differently than sea-level installations. We inspect for cracked panels, deteriorating mortar, and creosote buildup that exceeds safe levels. Most wood burning service calls run $280-$480 for a full cleaning, inspection, and minor refractory repair. If the firebox needs rebuild work, that typically ranges $650-$1,400.
Gas Fireplace Service
Gas fireplaces in Englewood’s older homes often suffer from worn thermocouples, clogged pilot assemblies, and failed ignition modules. The hard water and mineral content in the Denver metro area accelerates valve corrosion. A standard gas fireplace service costs $180-$320; if the gas valve or burner assembly needs replacement, expect $450-$780. Our Fireplace Services include testing gas pressure and combustion before we leave.
What’s the best time to schedule a fireplace inspection in Englewood?
September, before the October rush. By mid-October, our schedule fills with first-cold-night emergencies. A September inspection lets us catch seized dampers, cracked panels, or animal intrusion before you need heat. We offer our $89 seasonal tune-up through September 30. Call (844) 803-1545 to book ahead.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Cap & Crown in Englewood
Chimney cap and crown repair in Englewood typically runs $180-$650 depending on whether you need a simple cap replacement or full crown coating, and our crews complete most jobs in a single visit. The combination of intense UV exposure at elevation, sudden summer cloudbursts, and winter snow accumulation on warm roofs creates moisture cycling that untreated masonry cannot withstand. We install caps engineered for Front Range wind loads and apply vapor-permeable crown sealants that allow the chimney to breathe while blocking liquid water entry.
Custom Cap Installation
We measure your flue or chase, account for prevailing wind from the west and southwest, and fabricate a cap that fits - not one that “mostly fits.” Standard single-flue cap replacement runs $180-$260; stainless steel upgrades run $240-$340. Custom caps for unusual chase dimensions or exposed locations start around $450-$750 installed. The wind channeling along the South Platte valley justifies proper strapping and wind-load certification, especially for homes near Hampden Avenue or on higher ground.
Crown Repair & Coating
Concrete crowns crack faster in Englewood’s climate. The summer sun bakes them, sudden downpours soak the masonry, and freeze-thaw opens hairlines into channels. Crown coating with HeatShield or similar professional-grade sealant runs $280-$450 for a standard residential crown. Full crown rebuilds start at $650. Our Chimney Cap & Crown work includes inspecting the crown edge, the wash slope, and the bond to the brick or block below. A coated crown sheds water correctly. An uncoated, cracked crown funnels it into your firebox.
Why do chimney caps fail so often in Englewood?
The channeling effect of the South Platte valley accelerates wind at roof level, fatiguing cap mounting points until they lift or distort. Standard caps from big-box stores often fail at these loads. We install caps with proper strapping and wind-load certification, which matters especially for exposed homes. Call (844) 803-1545 for a free estimate - we’ll bring samples and dimensions.
Chimney Liner & Rebuild in Englewood
Chimney liner and rebuild work in Englewood runs $1,800-$4,500 for most jobs, with full rebuilds on older homes reaching $6,000-$9,500. We stock liners and chase components for the prefabricated metal systems common in 1970s and 1980s Englewood homes, and we can usually inspect within 24-48 hours. The freeze-thaw cycles and wind-driven moisture here create liner failure patterns distinct from calmer, lower-elevation markets.
Flexible Liner Installation
Englewood’s prefabricated metal-chase fireplaces, especially the 1970s-1980s units in concrete-block homes, were never built for decades of thermal cycling at elevation. Flexible stainless steel liners from DuraFlex conform to these factory-built flues without the rigid-section joints that corrode first. We size and install them for Englewood’s low-draft, warm-climate conditions. Most flexible liner replacements run $1,800-$2,800.
Liner Replacement & Full Rebuild
When original clay flue tiles have cracked from thermal shock or the galvanized liner in a prefab chase has rusted through, replacement is the only safe option. Liner replacement typically costs $2,200-$3,800 depending on chase height and access. When the chase itself is compromised - rusted wall panels, rotted framing, failed crown - a full rebuild strips to the framing and rebuilds with professional-grade materials rated for Colorado exposure. Full rebuilds range from $6,000-$9,500, completed in 2-3 days. Our Chimney Liner & Rebuild crews carry the parts to finish most jobs without ordering delays.
I have a prefab chimney from the 1980s - can you reline it or does it need a rebuild?
Most 1980s prefab chimneys in Englewood can be relined if the chase structure itself is sound; we determine this with a Level-2 camera inspection that shows you the actual condition. If the chase walls, framing, or crown are compromised, a rebuild is the safer and longer-lasting choice. We give you the photos and a plain-English verdict either way. Call (844) 803-1545 for an exact quote - estimates are free.
Brands We Service in Englewood
We work exclusively with professional-grade materials from HeatShield, Gelco, Olympia Chimney, and Famco - no builder-grade substitutes. Our Denver office stocks common liners, caps, and chase components for fast turnaround on Englewood jobs. See our full brands list.
Pricing for Chimney Cleaning in Englewood, CO
| Service | Typical Range in Englewood |
|---|---|
| Annual Sweep (Level 1 included) | $180 - $260 |
| Level 2 Camera Inspection | $280 - $450 |
| Creosote Removal (moderate buildup) | $220 - $340 |
| Soot Removal & Firebox Cleaning | $160 - $240 |
| Fireplace Cleaning (full service) | $190 - $280 |
| Cap Replacement (stainless, installed) | $240 - $420 |
| Damper Repair or Replacement | $180 - $380 |
| Chimney Waterproofing Treatment | $250 - $550 |
Accessibility of the chimney, severity of buildup, and whether we’re addressing damage from freeze-thaw cycling or wind exposure moves the number up or down. We provide no-hassle upfront pricing before any work begins - the estimate you approve is the invoice you pay.
Neighborhoods We Serve in Englewood
We repair, clean, and rebuild chimneys throughout Englewood’s 80110, 80113, and 80150 ZIP codes. Most appointments are scheduled within 24-48 hours.
- Belleview Park and surrounding residential streets
- Hampden Hills and south Englewood
- Original downtown grid near South Broadway
- Areas west of Santa Fe Drive
- North Englewood toward Belleview Avenue
Service Area - Cities Near Englewood
Our crews serve Englewood, CO directly, with neighboring coverage including Southglenn, CO, Centennial, CO, Castlewood, CO, Littleton, CO, and Highlands Ranch, CO. Dispatch and scheduling are coordinated from our Denver office, with local technicians carrying the parts and materials to complete most jobs in a single visit across the metro area we serve.
Serving Englewood, CO - Our Local Coverage Area
Hearthstone Chimney Co. crews serve Englewood and the communities around it; dispatch is coordinated from our Denver office. The map shows the Englewood coverage area; if your address is on it, we can help.
Also serving nearby: Englewood, CO, Southglenn, CO, Centennial, CO, Castlewood, CO, Littleton, CO, Highlands Ranch, CO.
FAQs About Chimney Cleaning in Englewood
Yes. We repair, clean, and rebuild chimneys throughout Englewood, from the original downtown grid near South Broadway to the residential areas west of Santa Fe Drive, north toward Belleview, and south toward Hampden Avenue. If your home is in Englewood’s 80110, 80113, or 80150 ZIP codes, you’re in our standard service area with no travel surcharge.
Every repair we perform in Englewood is covered by the same 90-Day Done Right Promise that governs all our work: in writing, no arguing. If the repair fails due to our workmanship or materials within 90 days, we return and correct it at no charge. This applies uniformly. The guarantee is backed by a company that has been in business since 1984 and plans to remain so. We’ll be here when you need us.
Ready to get your chimney inspected or repaired? Call Hearthstone Chimney Co. at (844) 803-1545. A live person answers 24 hours a day, and we’ll get you scheduled with upfront pricing and no surprises on the bill.
What happens when you call
- 1A real person answersNo phone trees - talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Englewood Customers Say
"The crown was cracked and taking water. He repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Rashad Jackson"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call ahead to warn me."
- Andres Flores"The liner was cracked in two places. He walked me through the options honestly, including the one that was cheaper for him and better for me."
- Xavier Freeman