Olympia Chimney Chimney Liner & Rebuild in Los Angeles: What to Know First
We provide independent Olympia Chimney chimney liner and rebuild service across Los Angeles, with most jobs completed in a single visit and upfront pricing before any work begins. A typical stainless steel liner replacement runs $2,800-$4,500, while partial rebuilds start around $3,200 and full rebuilds range $6,500-$12,000 depending on height and access. We do not mark up parts or hide labor hours.
This page is for homeowners who already have an Olympia Chimney liner or factory-built system installed, have been told it needs repair or replacement, and want a second opinion from a crew that knows the product line cold. As an independent Olympia Chimney service provider, we are not affiliated with or authorized by the manufacturer, but we have worked on enough of these systems across Silver Lake, Pasadena, and the San Fernando Valley to know where they hold up and where they don’t.
Call (844) 803-1545 anytime - a live person answers, 24 hours a day.
How Olympia Chimney Products Fail - and How We Fix Them
- Olympia 316Ti flexible liners in hillside homes above the 210: The titanium-stabilized alloy resists acid corrosion better than standard 304 stainless, but we’ve found the seam welds on pre-2019 production runs can open where the flex sections make their tightest bend - usually the offset above the smoke shelf in 1920s Pasadena bungalows with shallow fireboxes. We cut back to sound metal, sleeve with DuraFlex Pro or a new Olympia 316Ti section depending on budget, and back-weld the joint rather than relying on standard clamps.
- Olympia smooth-wall rigid liners in two-story Los Angeles homes: The cementitious fill between the smooth inner wall and outer corrugated jacket can crack after 15-20 years of thermal cycling, especially in homes near the coast where morning fog drives moisture into warm flue gases. The liner looks intact from below but has lost its insulating value. We pull a camera to confirm, then either reline with a new rigid assembly or switch to a listed flexible liner if the chimney has shifted.
- Olympia factory-built chimney systems in Canyon Country and Santa Clarita: The triple-wall air-cooled design works well until earthquake micro-movements loosen the twist-lock joints between sections. We’ve found the middle insulation layer compresses over time, creating hot spots that show up as exterior wall discoloration. We disassemble to the roofline, inspect each section for ovaling, and replace only what’s damaged rather than selling a full system.
- Olympia pellet vent liners retrofitted into masonry chimneys: The 3-inch and 4-inch diameters are correct for the appliance but often undersized for the chimney’s total height, causing back-puffing during Santa Ana wind events. We calculate actual draft requirements against the NFPA 211 tables, then either upsize the liner or install a proper termination cap with wind-resistant design - Olympia’s standard cap works fine inland but struggles in the gust corridors along the 405.
- Olympia chimney crown and wash rebuilds after L.A. rain seasons: The factory refractory crowns on older Olympia systems are poured thinner than site-built masonry and develop radial cracks after three or four wet winters. Water gets in, freezes in the air gap, and pushes the liner off-center. We remove the crown, pour a new concrete wash with proper slope and drip edge, and reseat the liner with a stainless steel top plate - never just caulk over the cracks.
Our Olympia Chimney Chimney Liner & Rebuild Process
- 1
Call and schedule. A live person answers, asks what you’re seeing or what another company told you, and books a Level-2 camera inspection. We do not give blind estimates over the phone.
- 2
Inspection with documentation. Our technician runs a 360-degree camera the full length of the flue, photographs every joint, offset, and defect. You see the images on a tablet before we leave. We deliver a plain-English verdict: repair, reline, or rebuild, with the reason stated clearly.
- 3
Parts decision. If your Olympia liner is under warranty, we note that and explain what the manufacturer will and won’t cover. For out-of-warranty work, we source OEM Olympia parts when they make sense, or match with DuraFlex, HeatShield, or Gelco components that meet the same UL 1777 listing. No builder-grade substitutes.
- 4
The repair. Background-checked, uniformed technicians complete most jobs in one visit. For a liner replacement, we drop the new assembly, seal the bottom with a proper collar and support, and top it with a listed termination. For rebuilds, we lay brick or pour refractory to match the original engineering, not whatever’s cheapest.
- 5
Testing and sign-off. We run a smoke test or draft gauge check, verify clearances to combustibles, and clean the work area. You get photos of the finished work, the written invoice matching the upfront price, and our 90-Day Done Right Promise in writing.
- 6
Follow-up. We call within two weeks to confirm performance, especially after the first few fires. If something’s not right, we come back. No paperwork, no arguing.
What Olympia Chimney Chimney Liner & Rebuild Costs in Los Angeles
These are real ranges for Olympia Chimney systems we’ve serviced in Los Angeles County over the past three years. Every job gets a free, written estimate before work begins.
| Service | Typical Range | What Moves the Price |
|---|---|---|
| Olympia 316Ti flexible liner replacement | $2,800 - $4,500 | Chimney height, number of bends, roof access |
| Olympia smooth-wall rigid liner replacement | $3,500 - $5,200 | Insulation type, demolition of old fill |
| Partial chimney rebuild (above roofline) | $3,200 - $6,000 | Brick matching, scaffolding needs, seismic reinforcement |
| Full chimney rebuild | $6,500 - $12,000 | Height, foundation condition, hearth extension |
| Olympia crown/wash rebuild with reseat | $1,800 - $3,400 | Size, liner diameter, flashing integration |
| Factory-built section replacement | $1,200 - $2,800 per section | Availability of original Olympia components |
Factors that increase cost: earthquake damage requiring structural assessment, hillside access requiring specialized scaffolding, and obsolete Olympia components that must be custom-fabricated. Factors that don’t: we do not charge extra for weekend or evening appointments, and our $89 Seasonal Tune-Up can catch liner problems before they become rebuilds.
Call (844) 803-1545 for a free estimate - the number we give you is the number on the invoice.
Why Los Angeles Homeowners Call Hearthstone Chimney Co. for Olympia Chimney Work
We’ve been answering the phone with a live person for over 12 years, and we’ve learned that Olympia Chimney owners in Los Angeles have usually already called someone else. They were told they needed a full rebuild when a liner replacement would do, or they were given a quote without anyone actually looking inside the flue.
We do it differently. Russell Haines and our technicians document every inspection with photos you can see and a plain-English verdict. We carry DuraFlex, HeatShield, Gelco, and Olympia-compatible components on our trucks, so most jobs finish in one visit. Our 90-Day Done Right Promise - Krafted right, Every time, Your home first, Standing behind it - means if it’s not right, we make it right, in writing, no arguing.
We’re not the cheapest option in Los Angeles. We’re the one you call when you want it done right the first time, so you never have to think about it again. That’s the square deal.
FAQs
No, independent service does not automatically void your warranty, but using non-listed parts or improper installation methods can. We document the original part numbers, use UL 1777-listed components, and note manufacturer requirements on your invoice so warranty coverage remains intact where applicable. Call (844) 803-1545 if you need help determining your warranty status.
Most flexible liner replacements are completed in four to six hours, with rigid liners or rebuilds taking one to two days depending on height and access. We complete most jobs in a single visit, and we do not leave your chimney unusable overnight without a temporary cap and clear explanation. Call (844) 803-1545 to schedule - estimates are free.
Repair is cheaper when the damage is localized - a single cracked section, a loose joint, or crown failure causing water entry. Replacement is the better value when corrosion is widespread, the original liner is more than 25 years old, or previous repairs have compromised the flue’s integrity. We give you both numbers and our honest recommendation, not a sales pitch. Call (844) 803-1545 for an exact quote.
We stock common Olympia liners, collars, and termination components, and we have same-day or next-day access to specialized parts through our distributors. For discontinued Olympia series, we fabricate compatible solutions from DuraFlex or Gelco that maintain the original listing. We never start a job without confirming parts availability. Call (844) 803-1545 to check your specific model.
A rebuild is necessary when the masonry structure itself is compromised - spalling brick, shifted courses, or a leaning stack - while a liner replacement addresses the flue interior only. Our Level-2 camera inspection shows the difference clearly, and we explain what you’re seeing before any work is authorized. Call (844) 803-1545 to book an inspection - estimates are free.
Ready to get it handled? Call Hearthstone Chimney Co. at (844) 803-1545. A live person will answer, day or night, and we’ll get you scheduled for a free estimate with upfront pricing, photos you can see, and a plain-English verdict. Find what’s wrong, say it plainly, fix it right.
Written by Russell Haines, Owner & Master Sweep, Hearthstone Chimney Co. at Hearthstone Chimney Co., serving Los Angeles and nearby areas.