Olympia Chimney Chimney Cap & Crown in Los Angeles, CA

Olympia Chimney Chimney Cap & Crown in Los Angeles: What to Know First

As an independent Olympia Chimney service provider in Los Angeles, we install, replace, and repair chimney caps and crowns on Olympia Chimney systems, with most calls completed in a single visit and upfront pricing that matches the final invoice. A standard Olympia Chimney cap replacement in Los Angeles runs between $280 and $520 depending on flue count and access; crown repairs with professional-grade coating typically fall between $450 and $850. We’re Hearthstone Chimney Co., and we’ve been answering the phone with a live person, day or night, for over 42 years. If you own an Olympia Chimney product and you’re seeing rust streaks, crown cracks, or water in the firebox, call us at (844) 803-1545. We’ll say plainly what we find and what it costs before we start.

Call (844) 803-1545

How Olympia Chimney Products Fail - and How We Fix Them

• Olympia Chimney 304 stainless multi-flue caps: The 304-grade series holds up well in most climates, but in Los Angeles the combination of marine layer moisture near the coast and inland thermal cycling from Santa Ana heat spells causes the welded seams at the corner joints to fatigue after eight to twelve years. We see this especially in homes west of the 405. Our fix is either a precision seam weld repair if the metal is still sound, or a full replacement with a heavier-gauge cap, properly counter-flashed to the crown.
• Olympia Chimney galvanized economy caps: These were common on tract homes built in the 1990s across the San Fernando Valley and eastern Los Angeles County. The galvanized coating fails predictably at the drip edge first, then the base flange rusts through. Once that flange is compromised, water runs directly down the flue tile. We replace these with stainless or copper equivalents, never re-installing galvanized on a masonry chimney in Los Angeles - the salt air and UV exposure make it false economy.
• Olympia Chimney wind-directional caps: The rotating collar on these can seize after years of ash and creosote buildup, particularly on wood-burning systems in the hillside neighborhoods of Mount Washington and Eagle Rock where homeowners burn regularly in winter. A seized collar defeats the purpose and can create downdraft issues. We disassemble, clean the pivot, and if the bearing surface is worn, we source the correct replacement collar rather than selling you a whole new cap assembly.
• Olympia Chimney crown wash on pre-fab chase covers: Olympia’s factory chase covers are galvanized steel with a baked enamel finish. The crown wash detail at the flue penetration is where we find the most trouble: the thin factory sealant bead cracks, and because these chase covers are often installed on second-story factory-built chimneys in Los Angeles with no proper cricket, water pools and accelerates rust-through. We remove the cover, rebuild the crown slope with proper pitch, and reinstall with a new silicone sealant rated for 400°F continuous exposure.
• Olympia Chimney masonry crown (poured concrete top): The poured crowns on older Olympia-compatible systems were often sloped insufficiently, or the concrete mix was too rich in Portland cement without air entrainment. In Los Angeles, that means the crown spalls and flakes within five to seven years of installation, especially after rare freeze events in the San Gabriel foothills. We grind back to sound concrete, apply a bonding agent, and rebuild with CrownCoat or a similar professional-grade flexible crown repair compound - never a thin paint-over that hides the problem for a season.

Our Olympia Chimney Chimney Cap & Crown Process

1. 1
   Call and schedule. A live person answers, 24 hours a day. We ask about your Olympia Chimney model if you know it, the symptoms you’re seeing, and we book a window that works.
2. 2
   Level-2 camera inspection. Our technician arrives uniformed and background-checked. We photograph the cap, crown, and flue interior. You see the photos. We give you a plain-English verdict on what’s failed and why.
3. 3
   Parts decision. If your cap is repairable, we say so. If replacement is needed, we explain OEM Olympia Chimney parts versus quality aftermarket alternatives from Gelco or Famco - what’s in stock, what the warranty implications are, and what we’d put on our own chimney.
4. 4
   Upfront pricing. The estimate is the invoice. No surprises. We note any access complications specific to your Los Angeles property, such as steep roof pitch or limited ladder staging.
5. 5
   The repair. Most Olympia Chimney cap and crown jobs finish in one visit. We document the work with after-photos.
6. 6
   The guarantee. Everything is covered by our 90-Day Done Right Promise, in writing. If it’s not right, we come back. No paperwork, no arguing.

What Olympia Chimney Chimney Cap & Crown Costs in Los Angeles

These are real ranges for Olympia Chimney systems in the Los Angeles market, based on jobs we’ve completed in the last eighteen months:

Steep roofs in the Hollywood Hills or hillside homes in Silver Lake add labor time. Second-story chimneys without roof-line access require additional staging. We tell you before we start. Call (844) 803-1545 for a free estimate - we’ll give you the exact number for your specific Olympia Chimney setup.

Why Los Angeles Homeowners Call Hearthstone Chimney Co. for Olympia Chimney Work

We’ve been sweeping and repairing chimneys in Los Angeles since 1984. Russell Haines, our owner, learned this trade at Los Angeles Trade-Technical College and has spent the better part of two decades inspecting chimneys from Pasadena to Pacific Palisades. We know Olympia Chimney products because we’ve worked on hundreds of them in local homes - not from a catalog, but from crawling on roofs in December rain and August heat.

Our 90-Day Done Right Promise means if the crown coating cracks or the cap seal fails, we come back. In writing. No arguing. Our technicians are background-checked and uniformed, and they carry professional-grade materials from DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield - so if your job needs a multi-brand solution, we don’t make excuses. Find what’s wrong, say it plainly, fix it right. That’s how we’ve operated for over 42 years, and it’s why we plan to be here thirty more.

FAQs