Chimney Repair in Tigard, OR - Same-Day Service, Done Right the First Time

Fast, Reliable Chimney Repair Across Tigard

Chimney Cleaning & Sweep - Tigard and repair services typically cost between $350 and $2,800 depending on the scope, with most standard repairs like mortar repointing or flashing replacement completed in a single visit. We’re Hearthstone Chimney Co., and we’ve been answering calls from Tigard homeowners since the early 1980s - back when most of the houses we’re now repairing were still relatively new. If you’re in the Bull Mountain area, Metzger, or anywhere along Hall Boulevard, our technicians can usually be there same day or next day. Call (844) 803-1545 and a live person will pick up, 24 hours a day.

Call (844) 803-1545

Tigard’s housing story is a specific one. The bulk of residential construction here happened during the 1970s and 1980s suburban build-out of Washington County, and builders cut costs by installing factory-built zero-clearance prefab fireplaces instead of site-built masonry. Those units are now 40-50 years old, well past their 20-30 year design lifespan. That means a “chimney repair” call in Tigard often starts with a homeowner who doesn’t yet realize their system is a prefab unit with discontinued parts, not a brick chimney they can simply repoint. We’ve walked through this discovery with hundreds of Tigard families. It’s not a sales pitch; it’s a condition report with photos you can see and a plain-English verdict.

Why Hearthstone Chimney Co. Is Tigard’s Preferred Chimney Repair Company

We’ve been serving communities like Tigard for over 42 years. That longevity matters because we’re not figuring out your neighborhood’s housing stock as we go - we already know that the ranch and split-level tract homes near Summerlake Park and the Cedar Hills border share the same prefab fireplace profiles, the same thin metal flue liners, and the same chase enclosures that rust through after four decades of damp Oregon winters.

Our Level-2 camera inspections document every finding with photos and a written verdict. You’ll see what we see. No surprises on the bill, either - we give no-hassle upfront pricing, and the number on the estimate is the number on the invoice. Most repairs are completed in a single visit by background-checked, uniformed technicians.

Every job carries our 90-Day Done Right Promise in writing. If it’s not right, we come back. No paperwork to dig up, no arguing. That’s the Keystone Standard: Krafted right, Every time, Your home first, Standing behind it.

And when you call (844) 803-1545, a live person answers. Not a voicemail, not a callback queue, not an app. Every hour, every day.

Our Chimney Repair Services in Tigard

Mortar Repointing

The minority of Tigard homes with true masonry chimneys - often the older properties near downtown or along Main Street - face a specific enemy: persistent moisture. With 37-38 inches of annual rainfall and damp winters that never fully dry out, mortar joints in Tigard’s brickwork erode faster than in drier climates. Moss and lichen growth, common on north-facing chimney exposures in the Metzger area, often hides this erosion until water is already entering the flue. Our repointing removes deteriorated mortar to proper depth and replaces it with color-matched, weather-resistant mortar formulated for the Pacific Northwest freeze-thaw cycle. A typical mortar repointing job in Tigard runs $850-$1,400 for a standard single-flue chimney.

Spalling Brick Repair

Spalling - the flaking and crumbling of brick faces - accelerates when absorbed moisture freezes and expands. Tigard’s temperature pattern is particularly cruel: frequent dips just below freezing during damp winter nights, followed by thawing. This cycle pops the faces off bricks, especially on chimneys with failed crowns or deteriorated flashing. In Bull Mountain neighborhoods, we’ve found spalling concentrated on chimneys where original construction used softer, lower-grade brick common to the era’s tract-home cost-cutting. We remove damaged brick, assess the underlying structure, and rebuild with matching units. Spalling brick repair in Tigard typically costs $1,200-$2,400 depending on height and accessibility.

Chimney Waterproofing

Waterproofing a chimney in Tigard is not optional maintenance - it’s defensive repair. The long, mild, damp winters here mean chimneys stay wet for months. Our waterproofing treatment uses vapor-permeable sealers from professional-grade suppliers that allow the chimney to breathe and dry while blocking liquid water entry. We apply this to masonry chimneys after any needed repointing or spalling repair, and we also waterproof prefab chase enclosures that have developed leaks at seams or corners. For Tigard’s climate, we recommend reapplication every 7-10 years. Chimney waterproofing in Tigard generally runs $450-$750.

Flashing Repair

Flashing - the metal interface where chimney meets roof - is the most common leak source we find in Tigard homes. The combination of heavy rainfall and the thermal movement of 1970s-80s roof structures as they age creates gaps and separations. In split-level homes common to the Cedar Hills border area, the multiple roof planes create additional flashing complexity and more potential failure points. We repair or replace step flashing, counter flashing, and cricket assemblies using galvanized steel or copper, sealed with high-temperature compounds. Flashing repair in Tigard typically costs $350-$650 for standard access; steep or complex roofs may run higher.

Chimney Rebuilding & Tuckpointing

When deterioration exceeds what spot repair can address, we rebuild. Chimney Liner & Rebuild - Tigard work is most often needed on the older masonry structures near downtown or on homes where previous owners deferred maintenance for decades. Tuckpointing - the cosmetic and structural renewal of mortar joints - is also available for chimneys with sound brick but failing mortar. We match mortar color and profile to preserve your home’s appearance. A partial rebuild in Tigard starts around $2,200; full rebuilds range $3,500-$6,500 depending on height and design.

Our Chimney Repair team also handles chimney cap and crown work - a natural complement to the services above. For dedicated cap and crown installation or repair, see our Chimney Cap & Crown in Tigard page.

Trusted Brands We Service in Tigard

We don’t use builder-grade substitutes. For flue relining, we specify DuraFlex stainless steel liners rated for the condensing conditions Tigard’s low-temperature burns create. For crown repair and resurfacing, we use HeatShield refractory compounds formulated to withstand thermal cycling. When prefab fireplace components need replacement, we source from Famco and Olympia Chimney - brands with proven Pacific Northwest distribution - so Tigard homeowners aren’t waiting weeks for parts that may or may not fit discontinued units. Our technicians carry common repair materials on every truck, which is how we complete most jobs in a single visit.

Common Chimney Repair Problems We See in Tigard Homes

• Rusted chase covers on prefab units. The thin galvanized steel covers original to 1970s-80s prefab fireplaces corrode through after decades of Tigard’s persistent moisture. Homeowners often discover this only when water stains appear on the ceiling near the fireplace.
• Creosote-compromided refractory panels. Tigard’s “take the chill off” burning pattern - frequent low-temperature fires - produces heavy first- and second-degree creosote that seeps into cracked refractory panels, accelerating their deterioration beyond what cleaning alone can address.
• Failed smoke seals and gaskets. The factory-built fireplaces in Summerlake Park and Bull Mountain neighborhoods rely on fiberglass or rope seals that harden and crumble after 40+ years. This allows smoke and combustion gases to enter wall cavities rather than exit through the flue.
• Hidden masonry erosion under biological growth. On Tigard’s few true brick chimneys, moss and lichen colonies trap moisture against mortar joints. By the time homeowners notice the greenery, freeze-thaw damage has often progressed to require repointing rather than simple cleaning.

Pricing for Chimney Repair in Tigard, OR

We Also Serve Cities Near Tigard

Our technicians regularly work in Tigard and the surrounding communities - Garden Home-Whitford, Beaverton, Cedar Hills, and Raleigh Hills. The same housing stock patterns, the same prefab fireplace era, the same wet winters. If you’re in any of these areas and your chimney needs attention, the same live-answer phone line and same-day scheduling applies. We also handle Fireplace Services in Tigard for homeowners whose systems need more than structural repair.

FAQs - Chimney Repair in Tigard