Chimney Repair in Clovis - Same-Day Service, Done Right the First Time

Fast, Reliable Chimney Repair Across Clovis

Chimney Cleaning & Sweep - Clovis is part of our full-service approach, and repair here typically runs $250-$1,800 depending on whether you’re facing mortar deterioration, spalling brick, or a full rebuild, with most of our Clovis customers seeing us the same day they call. We’re familiar with the stop-and-start burn patterns that San Joaquin Valley Air Pollution Control District curtailments create here, and we know how that idle-then-heavy-use cycle stresses chimneys differently than in communities where fireplaces burn steady all winter. If you’re seeing crumbling mortar, water stains on your ceiling near the chimney, or bricks flaking off in your 93611, 93612, 93613, or 93619 ZIP code, call (844) 803-1545. A live person answers, 24 hours a day.

Call (844) 803-1545

Why Hearthstone Chimney Co. Is Clovis’s Preferred Chimney Repair Company

We’ve been serving the San Joaquin Valley since 1984, and Clovis has been central to our route for decades. Our technicians know the difference between a 1990s tract-home zero-clearance fireplace in the 93619 growth corridors and the older masonry stacks you’ll still find near Old Town Clovis, and we inspect each accordingly.

Clovis homeowners have left us reviews mentioning specifically that we showed up when we said we would, explained the repair in plain English, and left no debris behind. We don’t chase volume. We answer the phone with a live person, every hour of every day, and our background-checked, uniformed technicians complete most repairs in a single visit.

Our response time to Clovis neighborhoods - from the newer developments near Clovis North to the established streets around Sierra Vista Mall - is typically same-day or next-morning. We carry DuraFlex liner components, HeatShield cerfractory sealant, and Famco flashing stock on our trucks, so we’re not ordering parts from Los Angeles while your chimney leaks - and if you need a Chimney Liner & Rebuild in Clovis, we can handle it on the spot.

Most importantly, every repair we perform in Clovis is backed by our 90-Day Done Right Promise in writing. If it’s not right, we come back. No paperwork, no arguing. That’s the Keystone Standard we’ve operated under for over 42 years.

Our Chimney Repair Services in Clovis

Mortar Repointing

Repointing is the removal of deteriorated mortar between bricks and its replacement with new, properly matched mortar. In Clovis, we see accelerated mortar joint failure in chimneys that sit idle through long summer stretches of 105-degree heat, then get hit with winter temperature inversions and tule-fog moisture. The clay flue tiles expand and contract against the brick, and by year 25 or 30 in a typical 1980s-2000s Clovis tract home, the mortar is powdering out. We grind out the bad joints to proper depth, match the sand and cement color to your existing masonry, and tool the new joints to shed water correctly. Most Clovis repointing jobs run $450-$850 for the upper chimney section.

Spalling Brick Repair

Spalling - bricks flaking, popping, or crumbling - happens when moisture gets inside the brick and freezes, or when summer heat bakes moisture against the surface. Clovis’s pattern of intense San Joaquin Valley sun followed by winter fog creates exactly this stress cycle. We see spalling most often on south- and west-facing chimney shoulders in neighborhoods like the older sections of 93611. Repair involves removing damaged bricks, installing matching replacements, and addressing the water source, which is often a cracked crown or failed flashing. Single-area spalling repair in Clovis typically costs $350-$650; extensive face rebuilding runs higher.

Chimney Waterproofing

Waterproofing a chimney in Clovis is not optional. The combination of rare but heavy winter rains, summer thermal shock, and the SJVAPCD burn curtailments that leave chimneys unused and unobserved for months means water intrusion often goes unnoticed until ceiling damage appears. We apply professional-grade, vapor-permeable sealants from Copperfield and Olympia Chimney that allow the masonry to breathe while shedding liquid water. Application includes thorough pre-cleaning and attention to the crown, cap, and flashing interfaces. A typical Clovis chimney waterproofing runs $400-$700 and carries our 90-Day Done Right Promise.

Flashing Repair

Flashing is the sheet metal seal where your chimney exits the roof, and it’s the single most common leak point we repair in Clovis. The master-planned boom that built much of the city used varying roof pitches and composite shingle systems, and original flashing often fails at the 20-30 year mark as sealants dry out. We remove the old flashing, inspect the roof deck for rot, and install new step flashing and counterflashing using Famco galvanized or copper components, sealed with high-temperature compounds. Most Clovis flashing repairs are $350-$600 and stop the leak the same day.

We also handle Chimney Cap & Crown in Clovis when the damage extends above the roofline, and our Fireplace Services in Clovis cover the firebox and damper repairs that often accompany chimney work.

Trusted Brands We Service in Clovis

We stock professional-grade materials from DuraFlex, HeatShield, Famco, and Copperfield on every truck serving Clovis. These are not builder-grade substitutes. DuraFlex liners handle the thermal cycling that Clovis’s intermittent burn pattern creates. HeatShield cerfractory sealant restores deteriorated clay flue surfaces without a full reline. Famco flashing components outlast the original sealants by decades. Because we carry inventory rather than ordering per job, your repair moves faster. Most Clovis customers who call in the morning have their chimney sound and sealed by evening.

Common Chimney Repair Problems We See in Clovis Homes

• Crown cracks from summer thermal shock. Triple-digit July and August temperatures bake chimney crowns year after year. The concrete or mortar crown develops hairline fractures that widen each season, letting water straight into the chimney core. We inspect this on every Clovis call because the damage is predictable and preventable.
• Bird and debris nesting in idle flues. Because SJVAPCD No-Burn Days can stretch for weeks, Clovis chimneys sit dormant through prime nesting season. Our technicians regularly pull compacted nests and debris from flues that haven’t seen smoke in a month. This is far more common here than in Sierra foothill communities where wood stoves burn continuously.
• Prefab fireplace panel deterioration. The factory-built zero-clearance units installed across 93611, 93612, and 93619 during the 1980s-2000s building boom are now 20-40 years old. Refractory panels crack, metal firebox walls warp, and gaskets fail. These require a different repair scope than traditional masonry, and we document the condition with our Level-2 camera inspection so you see exactly what we see.
• Flashing failure at the roofline. Original flashing sealants on Clovis tract homes dry out after two decades of San Joaquin Valley sun. Water follows the chimney down into attic spaces and shows up as ceiling stains. We repair the flashing and trace any secondary damage so the fix is complete.

Pricing for Chimney Repair in Clovis, CA

We Also Serve Cities Near Clovis

Our repair crews route daily through Fresno, Old Fig Garden, Sanger, and Fowler. If you’re in one of these communities and need chimney work, the same live-answer phone line and same-day scheduling applies. Our Chimney Repair in Clovis page covers our full service area, and our Chimney Repair hub explains our approach in detail for homeowners comparing options.

FAQs - Chimney Repair in Clovis