Chimney Liner & Rebuild in Medina, OH - Same-Day Service, Done Right the First Time

Fast, Reliable Chimney Liner & Rebuild Across Medina

Chimney liner replacement and rebuild work in Medina typically runs $2,800-$7,500 depending on whether we’re dropping a stainless steel liner into an existing flue or rebuilding masonry from the roofline up. Most of our Medina customers get their work scheduled within a week, and our technicians carry the common liner diameters and masonry materials to finish in a single day. Call (844) 803-1545 anytime - a live person answers, even at midnight on a Sunday.

Call (844) 803-1545

We’ve been driving out to Medina since 1984, long before the suburban build-out along Route 18 filled in with the ranch and split-level homes that now need their factory-built chimneys replaced. The old masonry stock near Medina Square is a different animal entirely - coal-era flues converted to gas inserts, abandoned thimbles, clay tile that’s turned to powder after a century of freeze-thaw. Our Chimney Liner & Rebuild team knows the difference because we’ve documented hundreds of these inspections with photos and plain-English verdicts that the homeowner can see for themselves.

Why Hearthstone Chimney Co. Is Medina’s Preferred Chimney Liner & Rebuild Company

Forty-two years in this trade means we’ve watched Medina’s housing stock age through two full cycles. The Victorian-era homes within a few blocks of Public Square were already old when we started, and now the 1980s and 1990s subdivisions near Montrose-Ghent are hitting the same point - factory-built chase covers rusting through, stainless liners installed in the 1990s reaching end of service life. We don’t guess at what we’ll find. Our Level-2 camera inspections show you the flue interior in color, and our technician explains what you’re looking at before any work is priced.

Medina customers call us back because the 90-Day Done Right Promise is backed in writing with no arguing. If the liner doesn’t draft correctly or a rebuilt crown leaks, we return and make it right. No paperwork to dig up, no transfer to a call center. Russell Haines built this company on the K.E.Y.S. code - Krafted right, Every time, Your home first, Standing behind it - and that still governs how every Medina job gets closed out.

Our response time to Medina is typically same-day or next-day for urgent liner failures, especially during heating season when a blocked or collapsed flue means no fireplace and potentially dangerous carbon monoxide backup. We’re familiar with the local permit requirements through the Medina Building Department and handle the paperwork on rebuilds that require inspection. Background-checked, uniformed technicians. No-hassle upfront pricing. The number on the estimate is the number on the invoice.

Our Chimney Liner & Rebuild Services in Medina

Stainless Steel Liner Installation

A stainless steel liner is the standard replacement for failed clay tile in Medina’s older masonry chimneys. We size the liner precisely to the appliance - a wood stove on Granger Road needs a different diameter and insulation package than a gas furnace venting through a shared flue near the Square. Our stainless installations use DuraFlex or Olympia Chimney components, rated for the specific fuel type, with proper top connections and rain caps from Gelco. A typical stainless liner installation in Medina runs $2,800-$4,200 for a straightforward single-flue drop.

Flexible Liner Systems

Some Medina chimneys have offsets, corbels, or tight cleanout bends that rigid stainless can’t navigate - especially the 1890s masonry where the flue was built around a coal range thimble and never intended for modern venting. Flexible liners conform to these irregular passages while maintaining proper draft. We see this frequently in the Italianate homes south of Washington Street, where the chimney was modified multiple times across heating eras. Flexible installations in Medina typically cost $3,200-$4,800 depending on length and insulation requirements.

Liner Replacement for Factory-Built Fireplaces

The suburban rings of Medina - neighborhoods built from the 1970s through 1990s off routes 18 and 42 - are filled with prefabricated metal fireplaces whose original manufacturers are long out of business. When the chase cover rusts and the factory liner fails, you can’t just drop in a generic replacement. We source compatible components from Famco and Copperfield, or rebuild the chase with proper clearances and a new stainless system. Liner replacement for factory-built units in Medina generally runs $3,500-$5,500, with chase rebuilds at the higher end if water damage has compromised the framing.

Partial and Full Chimney Rebuild

Medina’s brutal freeze-thaw cycles - worse than lakefront communities because there’s no moderating water mass - destroy mortar joints and spall brick from the crown down. A partial rebuild addresses the top few feet where damage concentrates, common on chimneys near Medina Square that lost their original crowns decades ago. Full rebuilds are necessary when the stack leans, the wythes separate, or the flue is compromised below the roofline. Partial rebuilds in Medina typically run $4,500-$6,500; full rebuilds range $7,000-$12,000 depending on height, scaffolding needs, and whether we’re matching historic brick. We also handle Chimney Repair in Medina for less extensive masonry work.

Trusted Brands We Service in Medina

We don’t substitute builder-grade materials to hit a price point. Our Medina trucks stock HeatShield cerfractory flue resurfacing mix for parging damaged clay tile in place, Gelco stainless caps and chase covers sized to common Medina chimney dimensions, and Olympia Chimney liner components in the diameters most frequently specified for local appliance venting. When a historic home near Public Square needs a custom solution, we source from Famco rather than forcing a standard kit that doesn’t fit. This matters because a liner that’s undersized or improperly connected will fail prematurely - and we don’t return to fix our own shortcuts.

Common Chimney Liner & Rebuild Problems We See in Medina Homes

• Abandoned coal thimbles and mismatched liner sections. Homes converted from coal to oil to gas near Medina Square often show three eras of modifications in one flue. Our camera inspection flags these immediately - they’re a consistent code issue in this neighborhood that rarely appears in newer subdivisions.
• Freeze-thaw mortar destruction on above-roof masonry. Medina’s inland position means sharper temperature swings than Cleveland lakefront properties. Water enters hairline cracks, expands on freezing, and opens the joint wider each cycle. By March, we’ve rebuilt dozens of crowns that were intact in October.
• Factory-built chase failure in 1980s-1990s subdivisions. The galvanized chase covers installed in Medina’s suburban build-out are now 30-40 years old. Rust stains on the siding, water in the firebox, and a crumbling prefab liner are the typical progression. We replace with stainless components that outlast the original by decades.
• Improperly sized liners from prior conversions. A gas insert jammed into a fireplace designed for open wood burning needs a smaller liner than the original flue. We’ve found unlined gas vents in Medina chimneys where the installer never dropped a proper liner at all - a dangerous condition our Level-2 inspection catches before it becomes an emergency.

Pricing for Chimney Liner & Rebuild in Medina, OH

We Also Serve Cities Near Medina

Our technicians cover the full corridor from Brunswick through Wadsworth, Copley, and Medina itself, including the Montrose-Ghent area where rural properties often have taller chimneys and longer liner runs. If you’re unsure whether your address falls in our service radius, call and ask - a live person will confirm. We also provide Chimney Cleaning & Sweep in Medina to keep your liner and flue in proper condition between major services.

FAQs - Chimney Liner & Rebuild in Medina